Removing Carpet Glue from Quarry Tiles with Tile Doctor Remove and Go in in Bordon Hampshire
This report comes from the small town of Bordon when we were contacted by a homeowner with a Quarry tiled kitchen floor that was in quite a state. The Quarry tiles had previously been covered with square carpet tiles which had been stuck to the quarry tiles with adhesive. The carpet tiles were starting to look worse for wear, so they decided to remove them.
The newly revealed quarry tiles were very dirty and badly stained, especially along the edges where the carpet tiles had been glued to the floor. Realising they had bitten off a little too much they contacted Tile Doctor to see what could be done to remove the glue and restore their appearance.
Happy to assist I popped over to Bordon to take a look and came up with a plan and quotation for the floor’s restoration. It was clear a lot of scrubbing would be needed to remove the glue, and I worked out a quote accordingly. Happy with the quote and the prospect of having the old quarry tiled floor restored as an original feature I was given the go ahead.
Cleaning a Quarry Tiled Kitchen
The first job was to cover the tiles in a strong dilution of Tile Doctor Pro-Clean and then leave it to soak in for ten minutes. The tiles were then power scrubbed with a black pad fitted to a rotary machine running on slow speed. Tile Doctor Pro-Clean was also scrubbed into the grout lines to get them as clean as possible. Once the whole floor had been treated in this manner it was rinsed off with water and the soiling extracted with a wet vacuum.
This first step got the tiles cleaner but struggled to remove all the glue staining, so for step 2 the process was repeated this time using Tile Doctor Remove and Go which is a powerful coatings remover that can shift most issues. Again, this was scrubbed in with a black pad and then rinsed and extracted afterwards.
After another inspection, stubborn stains were spot treated with more product and hand scrubbing until we were satisfied the floor was clear of all dirt and contaminates.
After rinsing and extracting thoroughly the floor was allowed to dry for several days.
Sealing a Quarry Tiled Kitchen
We returned later to seal the floor, testing first for damp to ensure the tiles were dry. All was well and we were able to move on to sealing the Quarry tiles with three coats of Tile Doctor Seal & Go. This is a water-based sealer (so no smell as it dries) that adds a lovely satin sheen to the Quarry tile.
The client was very pleased and so glad that he had managed to save the original quarry tiled floor and put it back into use. For aftercare cleaning and maintenance, Tile Doctor Neutral Tile Cleaner was recommended, this is an effective but mild tile cleaner that won’t impact the sealer.
Source: Professional Quarry Tiled Floor Cleaning Solutions and Services near Bordon Hampshire