Removing Ingrained Dirt from a Large Victorian Tiled Floor with Tile Doctor 200-grit Diamond Pad in Hebburn Tyneside

I was asked to quote for restoring a heavily marked and dirty Encaustic tiled Victorian floor at a village hall outside Hebburn. I was told there had been water damage and the tiles were in a very sorry state however these old floors can take a lot of punishment, and it never fails to surprise me just how well they can be recovered.

I arranged a site visit to inspect the floor and discussed with the client the process I would use to restore it to its former glory. Having taken detailed notes and measurements, I was able to work out a plan for its restoration and from this provide a detailed quotation. The management team of the hall were keen to have the work done and I was given the go-ahead.

Cleaning a Victorian Tiled Hallway

Having agreed a date for the work to start I began by giving the floor a good vacuum to clear any loose debris on the floor. I then applied a gel-based product called Tile Doctor Oxy-Gel to the tiles to keep moisture levels to a minimum. Old floors like these don’t have a damp proof membrane so you must take care not to exacerbate any damp issues. These tiles would be very porous after years of neglect and lack of sealer.

With the gel applied I used carbide brushes of increasing grits to start the cleaning and scrub away the worst of the stubborn dirt stuck to the tiles. This was then rinsed off and the slurry removed with a wet vacuum.

This improved the condition of the tiles, but more work was needed so another coat of Tile Doctor Oxy-Gel was applied and the scrubbing repeated but this time using a coarse 200-grit diamond pad. This did the job, and you could really see the tiles coming back to life. Again, this was rinsed off and extracted as before.

The floor was then given an acid rinse using Tile Doctor Acid Gel which further cleans the tiles and neutralises the pH level of the floor which would have been high due to the use of Oxy-Gel which is alkaline. The gel was scrubbed in with a brush and then rinsed off and extracted as before. The acidic nature of this product also dissolves any efflorescent salts which can be a common issue with old floors like this one, especially if they have been damp in the past.

The floor was then left to dry over a two-week period; they needed that long as this work was completed in the middle of winter. As mentioned before there was no damp-proof course and the tiles had experienced previous flood damage, so they took quite a while before they were fully dry ready for sealing.

Sealing a Victorian Tiled Hallway

I went back after two weeks, and after confirming the tiles were dry with a moisture meter proceeded to apply the first of what would be two coats of Tile Doctor Colour Grow. This was chosen as it contains a colour enhancer that did a lovely job of improving the colours in the tile, it’s also fully breathable which will help with any damp issues going forward.

As you can see this old Victorian tiled floor was vastly improved by the process and should keep that way for many more years to come. For aftercare I advised the use of Tile Doctor Neutral Tile Cleaner which won’t harm the sealer.

Source: Professional Victorian Floor Tile Restoration Services near Hebburn Tyneside