Tile Doctor Flexipad Used to Resurface Delaminating Sandstone in Rylstone Skipton

Pictured is a 100-year-old stone floor laid with a mix of sandstone with black limestone edging and inserts in the hallway of a property in the village of Rylstone near Skipton. It was very grubby and any sealer that may have been present was gone leaving it vulnerable to ingrained dirt. I understood the floor had never been cleaned using neutral cleaners and this is most likely the cause of the sealer deteriorating.

The stone floor was heavily ingrained with dirt and looking very unappealing which was a shame as it was quite an unusual design. I paid a visit to the property the next time I was in the area and after surveying the floor and running a few tests, I discussed what needed to be done to restore the appearance of the stone. Although the floor was intact there were a few areas where the sandstone had delaminated, and the grout needed replacing.

Keen to have the floor looking its best I worked out a quote for the renovation which was accepted and a date set to restore the floor.

Cleaning a Sandstone Tiled Hallway

To restore the appearance of the stone where it had delaminated, I had to apply some very aggressive diamond milling pads. The strongest was a 50-grit flexi pad which really cuts into the surface of the stone removing a thin layer of the stone in the process. Water is used to lubricate the process, and this also helps to capture the dust that is generated. Tile Doctor Pro-Clean was also applied to help clean any staining. A heavy rotary machine fitted with 17″ pads is used for most of the work and where needed small 4-inch pads fitted to a 110v water fed hand polisher is used for the edges and awkward places.

After the 50-grit pad the floor is rinsed with more water and the soiling extracted with a wet vacuum. The process is then repeated using finer 100-grit flexi pad and then the finer 200-grit flexi pad to refine the stone’s appearance, again rinsing and extracting after each pad. More Tile Doctor Pro-Clean was then scrubbed over the grout lines by hand to get them as clean as possible.

At this point attention turned to resolving some of the other issues such as the re-grouting with black grout near the doorways which were edged with black limestone. The thresholds around doorways always seem to experience damage in older properties, I suspect its due to the extra stresses surrounding the door frames.

Sealing a Sandstone Tiled Hallway

The floor was left to dry out and I returned later to seal the floor using three coats of Tile Doctor Colour Grow which we felt would help bring out the blackness of the limestone. This product also allows for vapour transmission which is essential in older properties without a damp proof membrane, it’s also an impregnator that soaks into the stone protecting it from within.

Once done I was very pleased with the work and the floor looked so much fresher and the contrast between the sandstone and black limestone was much improved. My client was also pleased and took the time to leave me the following on-line feedback:“Chris restored our 100-year stone hallway. He did an absolutely wonderful job. A really nice chap who likes his Yorkshire tea. Would recommend to anyone “

For aftercare I recommended they use Tile Doctor Stone Soap which is a gentle yet effective neutral tile cleaner that’s ideal for sealed floors as it won’t harm the sealer.

Source: Professional Sandstone Floor Tile Solutions and Services near Rylstone Skipton